Tralec Energy Saving Systems

The lighting inside buildings and on open spaces needs a significant part of your factory's power consumption. Most of the lighting systems have savings capacity that you could use immediately.

Our EcoMaxx ST-1 energy saving system enables an improvement in efficiency by  20 to 30 percent. The costs, energy consumption and the CO₂ toxic load will drop accordingly.

The system is applicable for all types of lamp which were used with a conventional (inductive) ballast. This includes fluorescent lamps, sodium and mercury discharge lamps. EcoMaxx ST-1 can also be used  with a mixed assembly of other lamp types.

Our product EcoMaxx ST-1 has lots of advantages:

• Low investment costs
• Fast amortisation
• Energy savings of ca. 20 - 35 percent
• Lifetime extend of the illuminant by ca. 30 percent
• Compensation of lighting must not be changed
• Lighting must not be rebuild
• Harmonics and transients are reduced
• System is maintenance free

According to the individual application, we offer One-phase or Three-phase devices for different electricity/ performance ratio. We could also adjust the body of our system with different chassis- and mounting options according to your special needs.

You find the technical data of the different device versions in our download area .

More information about EcoMaxx ST-1 e.g. functional principle and technical backgrounds you could find on our homepage in the area basic knowledge.

Do you have any questions, don't hesitate to ask.

Mr. Duewel is pleased to answer your questions via email or by phone at +49-040-727 57 235